High Transmittance Aluminosilicate glass sheet for Display Cover Glass
Ultra Clear Medium Aluminosilicate Electronic Float Glass(CHIYAN-M2) is an eco-friendly ultra clear alumino-silicate glass with certain strength.
Glass Type: Float glass
What is safety glass?
Tempered or toughened glass is a type of safety glass processed by controlled thermal or chemical strengthened to increase its strength compared with normal glass.
Tempering puts the outer surfaces into compression and the interior into tension.
Tempered glass product Attributes:
1.Safety Performance: Tempered glass will appear hurtless obtuse angles when breakage.
2.Strong Performance: Four times more than ordinary glass.
3.Heat stability Performance: Three times more than ordinary glass, could bear the temperature change of about 200°C.
4.Tempered glass has a very good performance of anti-curve, anti-impact intensity.
5.Once tempered glass breakage occurs, the glass could break into small fragments, which are harmless to human body.
Standard shipping Size:1300*1100mm (5th Generation)
Regular Thickness:
2.0mm 1.80mm 1.50mm 1.30mm
1.10mm 0.70mm 0.55mm
0.40mm 0.33mm 0.25mm
Features:
High Bending Strength Resistance
High Impact Resistance
High Scratch Resistance
High Flexibility
CHIYAN-M2’s 0.25~2.0mm thickness medium alumino-silicate glass has already been used in the market to meet a wide range of customers needs.
Note: The size can be customized according to customer's needs.
Application:Courtyard,Leisure,Facilities,Supermarket, Farmhouse, Laundry, Workshop, Kitchen, School, Bathroom, Babies and kids, Bedroom, Exterior,Dining,Warehouse,Home Office, Staircase,Outdoor, Living Room, Park,Wine Cellar, Office Building, Storage & Closet, Gym,
Mall, Entry,Apartment, Sports Venues,Basement,Hospital, Villa,Hotel,Home Bar, Hall, Garage &Shed
Usage: Industrial, Decoration,Curtain Wall
Product Composition
Ultra Clear Medium Aluminosilicate Glass achieves better stress and strain depth than ordinary soda-lime glass by increasing the Al₂O₃ content in the glass and increasing the ion exchange capacity.
| Composition items | SiO₂ | Al₂O₃ | Fe₂O₃ | CaO | MgO | K₂O | Na₂O |
| Range of set value | 69.0-72.0 | 4.5-8.0 | ＜0.01 | 6.0-8.0 | 3.5-5.0 | 0.1-1.0 | 13.0-14.5 |
Chemical Tempering Process Parameter Setting Reference
| Technological Parameter | 400°C | 410°C | 420°C | 430°C |
| CS(MPa) | DOL(um) | CS(MPa) | DOL(um) | CS(MPa) | DOL(um) | CS(MPa) | DOL(um) |
| 3H | ≥650 | ≥7.0 | ≥650 | ≥8.0 | ≥650 | ≥9.0 | ≥650 | ≥10.5 |
| 4H | ≥600 | ≥8.0 | ≥600 | ≥9.0 | ≥600 | ≥11.0 | ≥600 | ≥12.5 |
| 5H | ≥600 | ≥9.0 | ≥600 | ≥10.0 | ≥600 | ≥11.5 | ≥600 | ≥13.0 |
Note: Tempering solution Na+<0.5%. The above test results are affected by processing conditions, the data is for reference only, not as a basis for production.
Dimensions
| NO. | Item | Specification | Detection Method |
| 1 | Dimensional Tolerance | 1300*1100*(±2mm) | Tape Measure |
| 2 | Thickness | 0.50~1.1 ±0.05m 1.3~2.0 ±0.05m | Micrometer |
| 3 | Thickness Difference | ≤0.04mm | Micrometer |
| 4 | The Diagonal Difference
(Perpendicularity) | ≤0.3% | Tape Measure 
|
| 5 | Stripe | ≤Level2 | Point Sources of Light |
| 6 | Flatness (Before Tempering) | 0.50~0.55 ≤0.15%(=h/L) 0.70~2.0 ≤0.10%(=h/L) |  |
Appearance descriptions
| NO. | Item | Specification | Detection Method |
| 1 | Effective Mass Area | All areas outside 10mm of the edge are effective mass areas. |  |
| 2 | Appearance Defects | Scratches | w≤0.03mm, Allowed 0.03mm＜w≤0.05mm,L≤25mm (Controlled by point defects) w＞0.05mm, Not allowed | 
Fluorescent Lamp 2000-2500Lux 
|
| Bubbles | d≤0.05mm, Not counted 0.05mm＜d≤0.2mm, Numbers≤5 /m² d＞0.2mm,Not allowed |
| Inclusions such as stones and sticky tin | d≤0.05mm, Not counted 0.05mm＜d≤0.2mm, Numbers≤5 /m² d＞0.2mm,Not allowed |
| 3 | Edge Defects | Chipping | Single chipping L≤2.0mm,W≤1.0mm,D≤1/2 of the thickness (as the right picture showed). The cumulative length of chipping is less than 10% of the edge length of the glass plate. |  |
| 4 | Cracks and missing corners | Not allowed |
| 5 | Surface stains (glass shavings, attachments, point contamination) | No stains that cannot be removed by ordinary detergents are allowed. |
d≤0.05mm, Not counted 0.05mm＜d≤0.3mm, Numbers≤5 /m² d＞0.3mm,Not allowed | The same method as appearance detection. |
Packing Quantity
| S/N | L*W*T(mm) | Packing Quantity (Pieces/Box) |
| 1 | 1300x1100x0.25 | 900 |
| 2 | 1300x1100x0.33 | 1020 |
| 3 | 1300x1100x0.40 | 900 |
| 4 | 1300x1100x0.50 | 750 |
| 5 | 1300x1100x0.55 | 680 |
| 6 | 1300x1100x0.70 | 550 |
| 7 | 1300x1100x0.82 | 490 |
| 8 | 1300x1100x0.95 | 420 |
| 9 | 1300x1100x1.0 | 410 |
| 10 | 1300x1100x1.1 | 370 |
| 11 | 1300x1100x1.3 | 310 |
| 12 | 1300x1100x1.5 | 280 |
| 13 | 1300x1100x1.6 | 250 |
| 14 | 1300x1100x1.8 | 230 |
| 15 | 1300x1100x2.0 | 200 |
Packaging Diagram
Storage
Storage conditions: Temperature ≤30℃, humidity ≤65% (no condensation), shelf life is 6 months from the date of delivery.
